Drawing different object types like Walls and Columns using Draw

Drawing different object types like Walls and Columns using Draw

Drawing different object types like Walls and Columns using Draw How to draw masses, room, walls, column, furniture, beam, sunshade using Draw tool

In any plan view, you can use Draw to draw a room, a wall or a column. Snaptrude automatically assigns the type based on the dimensions of the mass that you draw.

You can change the mass type from Room to Wall or Wall to Column, by clicking on the type drop down in the object properties.

You can also draw rooms, walls and column in 3D view. Any mass drawn on the ground is automatically extruded to the storey height of 3m or 9'10".

 

You can draw beams, pergolas, sunshades or elevation elements, as well as furniture in 3D using the Draw tool.

In 3D view, click on Draw and draw on any non-horizontal surface. Draw in a full loop to complete the drawing. The drawn surface can be extruded using the extrude tool.

In Object Properties, you can assign this mass as Beam, Pergola, Sunshade or Furniture types.

Did this answer your question?


    • Related Articles

    • 4. Drawing the site boundary manually

      4. Drawing the site boundary manually How to draw a site plan on Snaptrude using the Draw tool To draw a site plan, go to plan view of Storey 1 and click on the Draw Mass button. Click within the canvas and move the mouse in the desired direction of ...

    • 1. Uploading an Autocad drawing of the site

      1. Uploading an Autocad drawing of the site How to bring in or import an AutoCad drawing of a site plan or a survey plan. You can bring in your .dwg files into Snaptrude. It will be imported at the exact dimensions and units as the AutoCAD drawing. ...

    • 3. Uploading sketches to upper floors for a multi storey building design

      3. Uploading sketches to upper floors for a multi storey building design How to design multi-storey building using a series of hand drawn plan sketches done on paper Amritha Krishnan If you are working on a multi-storey building project, and you have ...

    • 3. Import topography and set project datum

      3. Import topography and set project datum Load topographic map of the site and surroundings, set project datum to start modelling your design at the correct elevation. You can accurately tailor your design to the real world using our newly launched ...